TRP Spyre - fitting on Planet X London Road

jp1970
jp1970 Posts: 134
edited December 2015 in Workshop
I've just replaced the front disc caliper on my Planet X London Road with TRP Spyres.

Have managed to set up without any major problems (not withstanding a proper test ride tomorrow), but having given' them a final visual check the caliper looks really close to the wheel spokes .. About 3-4 mm.

I haven't used the PM or IM mounting adapters that have been supplied as they don't fit. I've also googled some images of London road with spyres they don't have the mounting adapters either.

The previous calipers were bottom of the range shimino BR517.


Should they be this close to the spokes ?

Thanks

Comments

  • ugo.santalucia
    ugo.santalucia Posts: 28,310
    Yes, it's normal
    left the forum March 2023
  • arlowood
    arlowood Posts: 2,561
    I replaced the Avid BB7's on my London Road with TRP Spyres from my previous Genesis Equilibrium build. No adaptors needed and no problems with clearance on my wheels (Moonglu handbuilts)

    I wouldn't worry - just get out and ride (weather permitting)
  • arlowood
    arlowood Posts: 2,561
    If you need any further reassurance, I've taken a couple of pics of my set-up

    Post mount without any adaptors/spacers

    21719890080_a2749ea33e_n.jpg

    Clearance between caliper and wheel spokes (front)

    23426416772_c9074e5c15_n.jpg

    I think you would need to have a set of very badly constructed wheels before any flexing issues would cause you problems

Categories