53/39 chainrings @ 110mm BCD!?

Ben6899

So I have a feeling that when I change the cassette and chain on my winter bike, I’ll need to fit new chainrings.

Current BB/crank is Campagnolo UT/Veloce with 110mm BCD. So you guessed correctly, the current chainrings are 50/34. Are there ANY standard double chainrings out there that will fit a 110mm BCD crank; rather than the usual 130mm BCD?

Cheers
Ben

imposter2.0

TA and Stronglight for starters. I used to run a 52 ring on a 110 spider..

Rightarmbad

FSA

Ben6899

Thank you. Some options to be going at, for now.

paul_onabike

BBB is worth considering.

Anonymous

I have a Miche 53 tooth ring on my 110mm SL-K crank on my TT bike.

An issue with swapping out this way is you still have only a 34 tooth on the inside and this can create jams when chsnging up or down as the gap is bigger for the derailleur to push the chain over. This is also more likely to cause the chain to fall off going down onto the smaller ring since the rear derailleur will lose a lot of tension on the chain.

Since I don’t really go onto the small ring when TTing its not an issue but on a road bike its likely to cause more issues.

StillGoing

Rotor do chainrings in 52/36 in 110BCD.

Monty Dog

FWIW Campagnolo 110mm chainring pattern has 1 bolt offset, so you can't simply use regular rings - Stronglight and TA do replacements - try Spa Cycles

moonshine

treat yourself to some of the best any shape, bcd and size you want
http://www.fibre-lyte.co.uk/fl/fl_cycles_carbon_chainring_2011.html

pinno

^ Very nice but the prices are eye watering compared to:

http://www.wiggle.co.uk/ta/chainrings/?dest=1&curr=gbp&utm_source=google&utm_term=ta%20chainrings&utm_campaign=UK_M_TA_Product_Category3_E&utm_medium=cpc&utm_content=s7cpP6zC1_dc|pcrid|67436417716|pkw|ta%20chainrings|pmt|e|prd|