Cannondale Supersix Evo headset woes!
burglarboycie
Posts: 200
Hi all
My new Supersix arrived on Wednesday. It came with the usual huge conical spacer so ordered the Cannondale 5mm headset cover. It arrived this morning so fitted it and cut the steerer accordingly but now the headset won't tighten to remove play! Has anyone else had this issue? Does the smaller spacer require the use of micro spacers beneath it?
I've not cut it too short or anything silly like that but just cannot see that it could be anything but micro spacers
Any help is massively appreciated as I'm desperate to ride it!!!
James
My new Supersix arrived on Wednesday. It came with the usual huge conical spacer so ordered the Cannondale 5mm headset cover. It arrived this morning so fitted it and cut the steerer accordingly but now the headset won't tighten to remove play! Has anyone else had this issue? Does the smaller spacer require the use of micro spacers beneath it?
I've not cut it too short or anything silly like that but just cannot see that it could be anything but micro spacers
Any help is massively appreciated as I'm desperate to ride it!!!
James
0
Comments
-
Post a couple of pictures... replacing that 25 or 30 mm spacer with something a bit more eye appealing should not impact headset tightening. My CAAD10 does use same headset from Supersix but things may have changed...0
-
Is the top cap bottoming on the steerer tube?0
-
This is the most likely. Put a 3 or 5mm spacer above the stem.Is the top cap bottoming on the steerer tube?0
