Bottom Bracket Replacement
Hello,
I will very soon take off my bottom bracket (BB86 on a Scott Foil). It's the first time I have done this so I am looking for a really detailed guide about how to do this and what to watch out for.
I have all of the necessary tools required including a rather expensive Enduro bb remover and assembler.
Thanks in advance for your help.
Nevica
I will very soon take off my bottom bracket (BB86 on a Scott Foil). It's the first time I have done this so I am looking for a really detailed guide about how to do this and what to watch out for.
I have all of the necessary tools required including a rather expensive Enduro bb remover and assembler.
Thanks in advance for your help.
Nevica
0
Comments
-
Is it a Shimano press fit BB?0
-
Sram, Gxp, press fit, BB860
-
0
-
If you have the proper tools then you should not have problems, take your time and if the bearing cups don't go in smoothly, stop and recheck that everything is lined up correctly. Clean the inside of the BB shell before installing the new bearings.
http://www.parktool.com/blog/repair-help/bb90-bb86-bb92-etc-bottom-bracket-service
https://www.youtube.com/watch?v=_SHj2pLH1No
https://www.sram.com/sites/default/files/techdocs/my10-sram-tech-manual-rev-a.pdf (page 29)0
