Help : Headsets and play : Ritchey Swiss Cross Disc

bendertherobot

Ok. The Swiss Cross Disc has a 1 1/8 fork. It's supplied with a drop in 1 1/8 WCS headset. Usual story there.

Same as on my Road Logic. Drop the cups in. Cut the fork. Install the Crown Race etc.

Now, on the Swiss Cross, different issue. New fork has an integrated crown race. You can see all the relevant details here:
http://www.cxmagazine.com/ritchey-logic ... canti-2015

So, basically, you don't use the supplied Ritchey Crown race, this thing:

http://www.wiggle.co.uk/ritchey-wcs-crown-race/

Problem is, I have some fork play. Tiny bit. If I tighten to remove, too much pressure, no steering.

You can see in the CX link above that there appears to be a space between fork and head tube. On mine there is not.

Here's the link to the specs of the fork:

http://ritcheylogic.com/cross/forks/wcs ... -fork.html

On the face of it, 45 degree crown race, so should be compatible with 45 degree bearing cup.

Here's a picture of mine. The question is, is there some incompatibility here?



My working theory is that this integrated race may be 45 degrees and sit in the bearing cup but, because it lacks the flat disc part of the above supplied crown race the fork is, in effect, slightly too high. That might account for the "gap" showing on the above pics, i.e. the correct crown race?

Any ideas?