Headset Mounted Bell

Bluestoesonnose
Bluestoesonnose Posts: 372
edited April 2015 in Commuting general
Got a new commuter bike, which came with a bell, which I'm finding useful when using cycle paths full of peds and as the summer months are coming I'm sure it'll get a fair bit of use

Whilst I'd like to keep the bell it's taking up room on the bars and with a Garmin mount and lights it's a little too much. I've seen a few steerer mounted bells but they seem set up for bikes with the front brake on the left and operation with the right hand, I'm looking for one I can easily operate with my left thumb so I can cover the front brake, oh, and it must be in black....

Any options out there?

Cheers
This is why!

Comments

  • redvee
    redvee Posts: 11,922
    http://www.sjscycles.co.uk/headset-moun ... prod23755/

    Have seen oher options but this is the first I found.
    I've added a signature to prove it is still possible.
  • dork_knight
    dork_knight Posts: 405
    What about the following, although you would need to see if you have enough clearance to rotate the bell for left hand operation;
    http://www.velovitality.co.uk/products/ ... unted-bell
    The path of my life is strewn with cowpats from the devil's own satanic herd.
  • Thanks, both aren't quite correct, I've emailed Lion to see if they can help
    This is why!
  • telesv650
    telesv650 Posts: 59
    I have a rotary bell moundet on the stem of my commuter. looks great but tends to ring when it hits bumps.

    One I have seen is a bar-end mounted bell.
  • Where did the stem mounted bell come from? Or is it a home made modifications?
    This is why!
  • The Rookie
    The Rookie Posts: 27,812
    Or you could get one of those top caps with the controls diameter bar mounted off them, put the Garmin on that (or on the stem or top tube behind the head tube) and keep the bell in easy reach?
    Like this http://www.ebay.co.uk/itm/Bicycle-Bike- ... 4193e776cc
    Currently riding a Whyte T130C, X0 drivetrain, Magura Trail brakes converted to mixed wheel size (homebuilt wheels) with 140mm Fox 34 Rhythm and RP23 suspension. 12.2Kg.
  • telesv650
    telesv650 Posts: 59
    Where did the stem mounted bell come from? Or is it a home made modifications?

    Mine came from the local market! It's meant to be handle bar mount, but I fitted it to the stem with a bit of inner tube for extra grip and to protect the stem. The only mod was to file a portion of the bell push away to clear the top of the stem.

    I'll take a pic at some point if you like?