Halo combat rear hub disc problem

dm1672
dm1672 Posts: 48
edited March 2015 in MTB workshop & tech
I bought a set of 24" halo combat wheels for my lads stinky jr build the, front hub takes a standard 160mm disc no problem but on the rear hub the disc holes don't match up.

What type of disc will the rear take any ideas the lad I bought them off was running a hope O2 brake and disc on it is this a different 6 hole pattern ?


Thanks for the help in advance

Comments

  • The Rookie
    The Rookie Posts: 27,812
    There are a few different standards, in what way doesn't it fit, bolts or location bore, I assume it's six bolt?
    Currently riding a Whyte T130C, X0 drivetrain, Magura Trail brakes converted to mixed wheel size (homebuilt wheels) with 140mm Fox 34 Rhythm and RP23 suspension. 12.2Kg.
  • nicklouse
    nicklouse Posts: 50,675
    Should be a standard fitting 6 bolt hub.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • The Rookie
    The Rookie Posts: 27,812
    That was my thought, suggesting a slight compatibility issue.
    Currently riding a Whyte T130C, X0 drivetrain, Magura Trail brakes converted to mixed wheel size (homebuilt wheels) with 140mm Fox 34 Rhythm and RP23 suspension. 12.2Kg.
  • dm1672
    dm1672 Posts: 48
    yeah its a 6 bolt hub but the holes are slightly misaligned i just wondered if there was a different type of six bolt disc seems strange as the front is standard,will get a pic uploaded of the hub with disc against it
  • dm1672
    dm1672 Posts: 48
    edited March 2015
    centre to centre is 40mm on bolt holes on hub and i measured a 6 bolt shimano disc and it comes in at around 43mm

    any ideas ?
  • dm1672
    dm1672 Posts: 48
    IMG_20150329_111628.jpg

    IMG_20150329_111603.jpg

    IMG_20150329_111550.jpg

    IMG_20150329_111527.jpg

    IMG_20150329_111258.jpg

    IMG_20150329_111244.jpg

    IMG_20150329_111615.jpg

    IMG_20150329_111339.jpg
  • dm1672
    dm1672 Posts: 48
    Bump......Anyone ?
  • nicklouse
    nicklouse Posts: 50,675
    only one 6 bolt standard. what is the rear hub?

    have you tried the front disc to check it is not the rear disc that is at fault.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • dm1672
    dm1672 Posts: 48
    Tried 3 different discs on the rear Nick the front fits a 6 bolt disc fine,they are standard halo combat wheels not sure if halo hubs or who they use for their wheels,the rear can be used as either canti or disc brakes and seller said it was a 165mm hope disc he ran on it so wasnt sure if that if that was a different bolt hole centre.

    its got me beat ive searched all over to find out why it wont take a normal disc

Categories