Fulcrum 7 bearings

wideboy

Hi all I've got a bit of sideways play in my rear fulcrum racing 7 hub, just replaced the freehub so It must be the bearings, been looking on the net for replacements but can't find them? Anyone else changed the bearings? What did you use?

ugo.santalucia

Knock them out and measure them... most likely the yard 8 x 12 x 28 mm... although not 100% sure... cheap as chips at Simplybearings, get the rubber sealed SKF or INA/FAG

rolf_f

ugo.santalucia wrote:

Knock them out and measure them... most likely the yard 8 x 12 x 28 mm... although not 100% sure... cheap as chips at Simplybearings, get the rubber sealed SKF or INA/FAG

Should actually be written on the seal irrc. I'd go an have a root around to find one but it would be quicker for the OP to just google it!

cycleclinic

They are 6001 bearings

wideboy

Thanks guys for your help, I need my bike for work everyday so would like to order new bearings ready to swap over so the bike won't be off the road for long.

http://simplybearings.co.uk/shop/advanc ... words=6001

plenty to choose from, whivh would you recommend?

Thanks again for all your help! Much appreciated!

Semantik

Wideboy- replied to your PM

arlowood

wideboy wrote:

Thanks guys for your help, I need my bike for work everyday so would like to order new bearings ready to swap over so the bike won't be off the road for long.

http://simplybearings.co.uk/shop/advanc ... words=6001

plenty to choose from, whivh would you recommend?

Thanks again for all your help! Much appreciated!

As Ugo suggested - go for the FAG or SKF rubber sealed variety. The SKF are £3.46 each ex VAT. Listed towards the bottom of the link you gave

wideboy

Thanks for your help everyone! Hope they will turn up later this week, and I'll be able to swap them over one evening.

holiver

How did it go?