15mm to 5mm qr adaptor
nonnac85
Posts: 1,608
I have a set of DT Swiss 1450 xr wheels and they currently have 15mm front hubs and 9mm rear hubs. I need to convert them to QR at the front as that's all my forks take (and preferably at the rear so I don't have to take the whole axle out to remove the wheel as the 9mm fits horizontally but doesn't release from the drop out vertically).
Anyway, I have tried the DT Swiss website and just got very confused :-/ Can you buy the adaptors I need and do they have to be DT Swiss adaptors?
Thanks!
Anyway, I have tried the DT Swiss website and just got very confused :-/ Can you buy the adaptors I need and do they have to be DT Swiss adaptors?
Thanks!
My Website - Trail Centre info for the UK: MTB Trail Time
0
Comments
-
Are you sure the front is 12mm and not 15mm?
Rear won't be 9mm, may well be 10mm?Currently riding a Whyte T130C, X0 drivetrain, Magura Trail brakes converted to mixed wheel size (homebuilt wheels) with 140mm Fox 34 Rhythm and RP23 suspension. 12.2Kg.0 -
Sorry front is 15mm. Rear is ~9 on a ruler but I guess 10 if I measured with something a little more accurate!My Website - Trail Centre info for the UK: MTB Trail Time0
-
They would need to be DT adapters. Not all hubs can be adapted and some that can need a complete axle assembly but others just need end caps.Transition Patrol - viewtopic.php?f=10017&t=130702350
-
DT swiss make a 15 to QR adaptor and there are others out there that do the job too.
https://www.dtswiss.com/Resources/Suppo ... n-kits.pdf
HWGXXX0002328S for the QR http://www.chainreactioncycles.com/dt-s ... -prod81483
or
HWGXXX0001919S for the 9mm (you can use superstar 9mm bolt through for this I believe)
http://www.chainreactioncycles.com/dt-s ... -prod238570
