Will this crank work for my bike

cjpowl6818
cjpowl6818 Posts: 17
edited July 2014 in MTB workshop & tech
Shimano Deore FC-M590 MTB crankset
Shimano SM-BB51 Bottom Bracket
44/32/22 gearing
175mm crank arm length
I have a 2005 Cannondale Jeckll this is whats on it.

Crank TruVatiV IsoFlow, 22/32/44
Chain Shimano 9-speed
Rear Cogs, SRAM PG-950, 11-34

Comments

  • The Rookie
    The Rookie Posts: 27,812
    Assuming your BB shell is 68mm English thread (almost certain, but you don't tell us what BB you have now) then yes.

    You'll need to get the frame faced by a bike shop first.
    Currently riding a Whyte T130C, X0 drivetrain, Magura Trail brakes converted to mixed wheel size (homebuilt wheels) with 140mm Fox 34 Rhythm and RP23 suspension. 12.2Kg.
  • poah
    poah Posts: 3,369
    The Rookie wrote:

    You'll need to get the frame faced by a bike shop first.


    no you won't. getting it faced is not a requirememt when you fit a new BB
    CCDB IL coil CS first impressions

    MTB Scotland youtube channel
  • The Rookie
    The Rookie Posts: 27,812
    No, but it is for fitting external BB's (suach as a BB51) where previously resided an internal one (unless by some miracle the frame was already faced) such as the Isoflows use.

    If it were external to external or internal to internal I'd agree, but it isn't.
    Currently riding a Whyte T130C, X0 drivetrain, Magura Trail brakes converted to mixed wheel size (homebuilt wheels) with 140mm Fox 34 Rhythm and RP23 suspension. 12.2Kg.

Categories