Power2Max powermeter fitment query

AndyD2574

I have been given a Power2max to try but Im not sure of the fitment.

I run Rotor 3D+ cranks and the power2max has only 3D cranks so is it compatible.

My cranks are -


The Power2Max looks like this -


Surely I can just take teh powermeter spider and fit it to my bike? OR do I need adapters.......Im a bit lost.

Any advice welcome

Thanks

jibberjim

It's not those parts which are the deciding factor, it's the bottom bracket, 3D and 3D+ can use the same BB, but they are also available in different...

AndyD2574

I have a Venge and I know this is bad but I don't even know what BB I have?

jibberjim

On the non drive side, take a photo of the bottom bracket of your existing bike, also measure the diameter of the axle of the Power2Max.

AndyD2574

I am wanting to keep using my Rotor 3D+ cranks and only use teh actual powermeter so can I do that?

imposter2.0

AndyD2574 wrote:

I have a Venge and I know this is bad but I don't even know what BB I have?

So how did whoever lent you the crank even know if it would fit..?

AndyD2574

He didnt.

He thought it woudl as I have 3D+ cranks but he thought I needed an adapter so thats why im confuded?

I thought I could just fit this onto my bike using the existing BB and cranks as this just replaced the spider??

clogg

I don't think it can be done just changing the spiders as it looks like they have a different spline shape for fitting to the crankarms. see

http://www.power2max.de/europe/en/produ ... s/spiders/

Easiest way I can think of is to get an adapter for bb30 to 24mm. Especially if its only on a temp basis.