Torque settings
Baldeagle690
Posts: 5
Hi
I can't find any workshop manual for my Mondraker Factor RR 2012 but I'm pretty OCD about torque settings. I need to bolt my rear Fox shock in after the top bearing seized up and loosened the bolt (I'm told no lube in the bush so just cleaned it)
My local bike shop said about 8NM which is a lot less than I would use on my motorcycles - M10 into alloy I would normally do 25 - 30NM. Obviously it will be threadlocked.
Any suggestions or ideas where I could get a workshop manual?
Cheers
I can't find any workshop manual for my Mondraker Factor RR 2012 but I'm pretty OCD about torque settings. I need to bolt my rear Fox shock in after the top bearing seized up and loosened the bolt (I'm told no lube in the bush so just cleaned it)
My local bike shop said about 8NM which is a lot less than I would use on my motorcycles - M10 into alloy I would normally do 25 - 30NM. Obviously it will be threadlocked.
Any suggestions or ideas where I could get a workshop manual?
Cheers
0
Comments
-
You will not find one.
Perhaps have a read the info on parktools about fasteners and torque settings."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0
