Inner tube adapters

kierhanlon6
kierhanlon6 Posts: 158
edited May 2014 in Workshop
I have a set of mavic cosmic carbone with 60mm inner tubes just sticks out of the rim not enought to get my pump on properly. Could I get an adapter to make it bigger pump the inner tube up and then remove the adapter. I tried 80mm inner tube but they look horrible. Cheers

Comments

  • Matthewfalle
    Matthewfalle Posts: 17,380
    Yes - look at CRC : I think they have Zipp ones that do this. Definitely some on there that would fulfill this function, however as I'm engrossed in Ghost Rider I'm not heading across to look.

    Or get shorter valves extenders.

    Or inner tubes with shorter valves. You then can take out the old ones and set fire to them, which is nice.

    A veritable myriad of options.
    Postby team47b » Sun Jun 28, 2015 11:53 am

    De Sisti wrote:
    This is one of the silliest threads I've come across. :lol:

    Recognition at last Matthew, well done!, a justified honour :D
    smithy21 wrote:

    He's right you know.
  • sungod
    sungod Posts: 17,351
    as above, the zipp type could do it

    http://www.wiggle.co.uk/zipp-black-valv ... ta-valves/

    bear in mind, if the tubes have removable cores you need to do them up really *tight* otherwise the core will tend to unscrew when you remove the extender, all this and more is explained here...

    http://www.slowtwitch.com/Tech/Valve_Ex ... _3007.html
    my bike - faster than god's and twice as shiny
  • Bar Shaker
    Bar Shaker Posts: 2,313
    Zipp make extenders in 25, 40, 60 and 80mm lengths.

    I wouldn't remove them from the valve. Constantly refitting and removing them will likely abrade the tube against the rim, around the valve.
    Boardman Elite SLR 9.2S
    Boardman FS Pro

Categories