If not Rotor then what?

Hi fellas, perhaps you can help me.
I've a really nice Cannondale Slice tt bike that I'm in the process of lightening. Through my local bike shop I ordered some Rotor 3D+ cranks and round 53/39 rings, a very light arrangement to replace the boat anchor set the bike came with. The Rotor cranks use the bb30 system so should be a straight swap. I ordered the standard 130bcd spider but what came was what is now called the MAS (micro adjust system) spider, a solid round of metal instead of the spider. It weighs more and looks quite ugly. Apparently the standard spider is no longer available, a fact unknown by my bike shop. The shop's been very good and will send it back if I don't want it, but to the crux of the question, what other choices do I have? I want stiff, light, 130bcd and preferably bb30. I could sleeve down the bearings to 24mm I suppose.......
Your thoughts on the matter would be appreciated
How.
I've a really nice Cannondale Slice tt bike that I'm in the process of lightening. Through my local bike shop I ordered some Rotor 3D+ cranks and round 53/39 rings, a very light arrangement to replace the boat anchor set the bike came with. The Rotor cranks use the bb30 system so should be a straight swap. I ordered the standard 130bcd spider but what came was what is now called the MAS (micro adjust system) spider, a solid round of metal instead of the spider. It weighs more and looks quite ugly. Apparently the standard spider is no longer available, a fact unknown by my bike shop. The shop's been very good and will send it back if I don't want it, but to the crux of the question, what other choices do I have? I want stiff, light, 130bcd and preferably bb30. I could sleeve down the bearings to 24mm I suppose.......
Your thoughts on the matter would be appreciated
How.
0
Posts
This is the 2014 Rotor 3D+ non MAS
http://www.bike24.com/1.php?content=8;n ... =235;pgc=0
http://www.velotechservices.co.uk/shop/vclose2.asp?prd=77086&cat=7404003309