"notchy" feel and sound after changing cassette

satnavsteve
satnavsteve Posts: 223
edited May 2014 in Workshop
Hello,
Just changed the rear cassette on my Sabbath. Have gone from an ultegra 6700 11-25 to a 105 5700 12-27. The rest of the groupset is all ultegra (compact).

When pedalling slowly with some resistance I can now feel a slight notchiness which I think feels like it is coming from the chainset - almost as if you can feel the chain engaging / leaving the teeth. Can't see anything obvious and had a quick play with inline adjusters but pretty clueless really.

Any advice?

Thanks
S

Comments

  • 47p2
    47p2 Posts: 329
    Both cassettes are the same spec, just made from different materials

    Did you fit any spacers required before putting the new cassette on the freehub?
  • satnavsteve
    satnavsteve Posts: 223
    Yep, spacer in place as per destructions.
  • 47p2
    47p2 Posts: 329
    How old and how many miles on the chain?
  • sungod
    sungod Posts: 17,351
    did you measure the chain to check if it's worn?

    if not, do it, a worn chain will not be kind to a new cassette

    otherwise, probably just needs the adjustment tweaking, although if the old chain was just right for length you really ought to fit a slightly longer one to match the increased size of the largest cog
    my bike - faster than god's and twice as shiny
  • satnavsteve
    satnavsteve Posts: 223
    Chain has only seen about 700 miles.
    From what I've read before, it's a combination that should be ok chain length wise.
    What should I be looking at in terms of set up? Changes are all good.