Novatec Hub Body

cgrenn
cgrenn Posts: 206
edited May 2014 in Road buying advice
Wondering if someone can help me, Im doing a bike build and want to change the Hub body on my Shim Carbon Tubs to Campag. Is this Possible? The Novatec Hub I have are F372SB but just want to replace the body.Can any one point me in the right direction in what Campag Hub Body would fit that Hub?

Thank You!

Comments

  • ugo.santalucia
    ugo.santalucia Posts: 28,312
    Yes, you need a standard Novatec A type freehub. You will also need to swap the position of the silver metal 1 mm washer, which currently sits on the non drive side.
    left the forum March 2023
  • cgrenn
    cgrenn Posts: 206
    Could I use the Body on this Ugo?

    http://www.ebay.co.uk/itm/Novatec-32-ho ... 1c40627176
  • ugo.santalucia
    ugo.santalucia Posts: 28,312
    Yes, virtually it is the same hub without the funny flange design and paired holes. Check where the washer sits and put it in the same place.
    You need a 5 mm Allen Key and 1 x 17 mm cone spanner to remove the free hub
    left the forum March 2023
  • cgrenn
    cgrenn Posts: 206
    Do I need the 1 x 17 mm cone spanner? I thought you just used 2 Allen Keys and your done!

    Thanks for all your Help tho Ugo!
  • ugo.santalucia
    ugo.santalucia Posts: 28,312
    Yes you do
    left the forum March 2023

Categories