Marzocchi All Mountain 4.

yarocin

Hi All!

I have commencal meta 5.5.3 with marzocchi all mountain 4 bomber fork (2006). It has never been serviced, so I decided to do it myself as one of the seal met its end.
I disassembled the fork hoping that finding a service manual will be a piece of cake. As it came out, this is an OEM fork, so there is no drawing and service manual (few hours of searching the internet).
Could you please help me and let me know if the configuration of parts in the picture is correct?
Thank you.

nicklouse

Might have some info on this fork but it is on another PC.

nicklouse

Ok need good clear images of the lowers and uppers and any controls on the top caps or on the bottom of the lowers.

As that is not an AM 4 and there was not an All Mountain 4 that year. Similar name different forks.

It does not help in that 2006 was one of the most confusing years of fork production.

yarocin

I hope pictures are better now
The only adjustment is a rebound on right leg.
I have checked drawings of all all mountain forks, but there is no second (long) spring.
Please let me know if you have any ideas

nicklouse

I see no fork parts just internals.

The lowers? The crown assy? The coax and adjusters!

Or take the whole thing to a Marz specialist and the can sort it.


The info provided could be any Marz coil sprung fork.

yarocin

I hope these pictures help.
There are no adjusters at the top of the fork, no coax.
There is only rebound adjuster at the bottom of right leg.
Service of this fork costs around 70-80 pounds The same used fork costs the same money on ebay.