Fulcrum 5/ 7 axel spacer

colmcasey
colmcasey Posts: 39
edited April 2014 in Workshop
I have a set of fulcrum 5's that I converted to shimano. I have actually never used them as use a power tap. They are spares. When converting I misplaced an axel spacer it's approx 10mm in length. I have being trying to source spares but was told by the fulcrum distributer that they don't do them anymore and buy new wheels. Anyone any ideas of where I might get some spacers.

Comments

  • arlowood
    arlowood Posts: 2,561
    How about this

    http://www.ebay.co.uk/itm/CNC-Aluminium ... 0498720521

    Include spacers to convert 100 hubs for use in 110/120/130 drop outs so should have a 10mm spacer included. Not sure if they come in pairs but you could always ask the seller.

    Correction - I guess converting 100mm to 120mm would need 2x10mm spacers
  • ugo.santalucia
    ugo.santalucia Posts: 28,312
    A spacer to convert Shimano to Campag cannot be 10 mm... maybe more like 1 mm. If you can't find the correct 1 mm spacer, just buy a 1 mm steel washer and grind it down until it fits
    left the forum March 2023
  • mamba80
    mamba80 Posts: 5,032
    colmcasey wrote:
    I have a set of fulcrum 5's that I converted to shimano. I have actually never used them as use a power tap. They are spares. When converting I misplaced an axel spacer it's approx 10mm in length. I have being trying to source spares but was told by the fulcrum distributer that they don't do them anymore and buy new wheels. Anyone any ideas of where I might get some spacers.

    I kno what you mean, even if no one else does!! its the small tubes that space out the bearings, f/h and slide over the axle inside the hub?
    is it the one that goes between the f/h and the inner hub bearing?
    if you converted to shimano, then you will have a spacer in between the inner and outer bearings in the campag freehub, you may have to alter its length.
    If you tell me which spacer, then I will give you the exact measurement from my set of F5s.

    I might have one kicking about.
  • colmcasey
    colmcasey Posts: 39
    Thanks for the replies. Sorry couldn't find the post. I actually borrowed a fulcrum 7 of a friend and took the exact washer to make sure it all works. it's the rear spacer that goes between the free hub and bearing on the inside. I have a picture but struggling to upload.

Categories