BB help

mentalalex
mentalalex Posts: 266
edited March 2014 in MTB workshop & tech
I have a 2014 Whyte 29-C

It has a BB30 but I'm using a sram press fit sleeve then installing standard cups then placing the crank in, I seem to be having a lot of issues with this setup.

Are there any other ways i can get a converter so i can go from BB30 to standard 'GXP' fitting, I can't seem to find much at all on the typical sights.

Any suggestions?

Thank A
I do science, sometimes.

Comments

  • mentalalex
    mentalalex Posts: 266
    Sorry its PF30 not BB30
    I do science, sometimes.
  • nicklouse
    nicklouse Posts: 50,675
    What issues are you having?
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • mentalalex
    mentalalex Posts: 266
    sleeve seems to be coming out the frame while riding, by around 5mm.
    I do science, sometimes.
  • coulddobetter
    coulddobetter Posts: 812
    I went bb30 to external. The sleeve was pressed in by bike shop secured with loctite. Had to wait 24 hours for it to set prior to fitting new bearing.

    Sleeve I used was the fsa one available from chain reaction.
  • Levi_501
    Levi_501 Posts: 1,105
    Not sure if is exactly what you want, but Praxis do a press fit BB that converts to normal and is threaded together.

Categories