Hub Spacer Advice Needed

pgrhodes

I have removed a set of wheels from my best bike which will now be used for my winter ride. However, the wheels have an 11-Speed hub (Ultegra 11-speed cassette currently fitted) but my winter bike is 10-Speed.

Please can any point me in the right direction of where I can buy the correct spacer(s) I need to run a 10-speed '105' cassette on these? Any internet links direct to where I can get these would be fantastic

Weeman1973

http://www.ebay.co.uk/itm/GENUINE-SHIMA ... 4897.l4275

This will do the trick - may need two or three though depending on your free hub. Just add these at the back so it takes out all the slack then re-index your gears accordingly.

ugo.santalucia

If you can get hold of a Shimano 9 speed spacer (those that sit betwen sprockets) from an old cassette, this is 2.6 mm and works well to replace the 1.85 + 1 mm you need for a 10 speed cassette. Basically you need someone with an old 9 speed casette to dispose of

Garry H

I have one. pm me

majormantra

You can also use Mavic spacers. (In addition to the spacer that comes with the cassette for 105 and above.)

pgrhodes

Garry H wrote:

I have one. pm me

Hi Garry H,

PM seems to be out of action at the moment.

I would be keen to buy the spare you have. Please email at...

Philrhodes (at) btinternet (dot) com

Thanks everyone else for your input too.

Cheers,
Phil