Replacing Crankset of Specialized Enduro Elite 2007
Hamer252
Posts: 7
Morning
Looking for some suggestions on possible replacements for my crankset for my Enduro Elite 2007 model the threading has gone and so the crank arm keeps falling off. Wondering if any one had some good suggestions,or has replaced theres all ready as owners of this bike will know it can be quite a low ride so any extra clearance is a bonus.
Current set up is
Custom Truvativ Stylo with Black Spire Stinger shift guide, 24A/36A/alloy guard teeth
BB 73 I have a hope bottom bracket on but am happy to change that if needs be.
Many thanks Jamie
Looking for some suggestions on possible replacements for my crankset for my Enduro Elite 2007 model the threading has gone and so the crank arm keeps falling off. Wondering if any one had some good suggestions,or has replaced theres all ready as owners of this bike will know it can be quite a low ride so any extra clearance is a bonus.
Current set up is
Custom Truvativ Stylo with Black Spire Stinger shift guide, 24A/36A/alloy guard teeth
BB 73 I have a hope bottom bracket on but am happy to change that if needs be.
Many thanks Jamie
0
Comments
-
replace the worn out bolt?"Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
the threading has gone inside as well as, The bolt has worn the threading away don't think it has been replaced since bought from new as I have had the bike 2 years now second hand0
-
odd that an alloy bolt would wear out steel threads.
but any GXP crankset if you dont want to do any mods to the BB
or a HT11 type and remove the GXP shims from the Non drive side bearing."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0
