Hadley rear hub offset to disc side....?
cts5555
Posts: 11
Hi all
Bought a rear Mavic Wheel with Hadley SDH 5.1 hub, its a 135x10mm though axle and fitting it to a Lapierre Spicy 916 2010....
The wheel mounts but is offset to the disc side, enough for my 2.4 Contis to rub the frame.
Ive had the hub apart and inspected, and all looks brand new, the disc side 'nut' has a rubber seal and this sits up against the bearing inside the hub, i cannot understand how the spacing is offset, unless im supposed to have some additional spaced between the nut with the rubber seal, and the bearing outer race....
Anyone got any info?
Here is a picture of the internal axle and 'nuts'. Although mine is a 10mm Though Bolt.
http://www.nwmtb.com/product/7318/Hadle ... ersion_Kit
Bought a rear Mavic Wheel with Hadley SDH 5.1 hub, its a 135x10mm though axle and fitting it to a Lapierre Spicy 916 2010....
The wheel mounts but is offset to the disc side, enough for my 2.4 Contis to rub the frame.
Ive had the hub apart and inspected, and all looks brand new, the disc side 'nut' has a rubber seal and this sits up against the bearing inside the hub, i cannot understand how the spacing is offset, unless im supposed to have some additional spaced between the nut with the rubber seal, and the bearing outer race....
Anyone got any info?
Here is a picture of the internal axle and 'nuts'. Although mine is a 10mm Though Bolt.
http://www.nwmtb.com/product/7318/Hadle ... ersion_Kit
0
Comments
-
You sure the wheels not out if dish?A Flock of Birds
+ some other bikes.0 -
used wheel? what did it come off?
flip the wheel in the drop outs does it rub on the other side? yes? get the wheel re dished to suit your frame."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
D'oh!!!
Yes, bet that is it, will drop off at LBS tomorrow...
Thanks guys0
