Replacement pump attachment nozzle/thingy

Bokdrol

Hallo members

Need to replace the nozzle attachment thingy on my track pump. Any suggestions on a quality replacement - link appreciated.
Looks like this and I need one to fit both types of valves.

Thank you members.

declan1

What model is your track pump? It might be worth getting a good quality new one.

bill_gates

I changed the nozzle on my SKS easily enough which was cheaper than replacing the whole unit. I think if there are spares available and the rest of the pump is in OK condition then get a spare part.

desweller

If you can't get the same head then you can get the Joe Blow heads by Topeak that can be fit as an aftermarket item. They are really good.

blackhands

If you want the best - and I mean the best, then a Hirame adaptor will last forever (not cheap though, and only for Presta valves):

http://www.ebay.co.uk/sch/i.html?_kw=hi ... mp+adaptor

pete.whelan

a replacement hose and head for a Leyzne pump works well on most other pumps. the head is reversible

Bokdrol

Thanks for the replies.

Pump is still in excellent condition and it is only the head that is not sealing. The Joe Blow replacement is in my budget range.

Thanks to all.

mechanism

I got the Topeak TwinHead upgrade kit which is a hose + head with a selection of fittings. It grips onto these Mavic Presta valves that the old one couldn't cope with.

http://www.topeak.com/products/Pumps/TwinHeadUpgradeKit

Yossie

Chain Reaction Cycles, £8 - you get the head and a new hose. I've had a couple - very good quality, cheap,. last for ages.

If you don't want to fit the hose just take off the head and attach to existing pump.

http://www.chainreactioncycles.com/s?q= ... ump+spares