Helmet Mounted Lights

ol9
ol9 Posts: 50
edited September 2013 in Commuting general
Folks,

Any reccomendations for both forward and rear facing.

Will be used with flash/flare, I don't ride on unlit roads so don't need to be mega powerful and wary of blinding someone as I get eye contact.

Thanks in advance

Stuart

Comments

  • rubertoe
    rubertoe Posts: 3,994
    OL9 wrote:
    Folks,

    Any reccomendations for both forward and rear facing.

    Will be used with flash/flare, I don't ride on unlit roads so don't need to be mega powerful and wary of blinding someone as I get eye contact.

    Thanks in advance

    Stuart

    Get some of these
    "If you always do what you've always done, you'll always get what you've always got."

    PX Kaffenback 2 = Work Horse
    B-Twin Alur 700 = Sundays and Hills
  • I've just got a Knog Blinder road 2, seems pretty good, at 200 lumens not too bright, going to give its first test tonight.
    Cipollini Bond
    Pinarello GAN
  • slowbike
    slowbike Posts: 8,498
    Please just ensure your brighter light is on your bars. It can confuse the hell out of a driver otherwise - as I found out!
  • notnot
    notnot Posts: 284
    How bright did you want? These are cheap, and work, though ugly and the mounting system's not the most elegant http://www.planet-x-bikes.co.uk/i/q/LIS ... ycle_light
  • redvee
    redvee Posts: 11,922
    I had a couple of cheap Chinese LEDs on my helmet but came to the decision that I don't always ride with my head at the correct angle for people behind to see the rear light so mounted a Fibre Flare on the back of my helmet.
    I've added a signature to prove it is still possible.
  • ol9
    ol9 Posts: 50
    Thanks for your replies folks.

    In an ideal world I wish I could mount the Flash & Flare on my Helmet, due to their compact size I think they'd be perfect for the job, am surprised there isn't an option to do so. I know there's a relatively expensive helmet mount available for the joystick, does the Flash fit this?
  • What about this: http://www.topeak.com/products/lights/headlux

    it's a half decent 'be seen' helmet light. I find bright helmet mounted lights for commuting tend to distract drivers and become a hinderance rather than a help.

    - jon
    Commuting between Twickenham <---> Barbican on my trusty Ridgeback Hybrid - url=http://strava.com/athletes/125938/badge]strava[/url
  • I recently picked up a cheap LED head torch from the "The Range", cost me all of £3 (I think, it was either £2.99 or £1.99), I only really bought it on a "this should be a laugh" basis, but it does several flashing modes and was surprisingly bright, I cut the band off it and replaced with a strip of that double sided velcro (which I bought years ago for a helmet camera).
    Not convinced of it's waterproofness, but for the price and to increase visibility on the road it was a bargain.

    This is the same thing:

    http://www.ebay.co.uk/itm/S0BZ-New-5-LE ... 4610fe8f32
  • I've got the Exposure Joystick on my helmet, with the Redeye at the back. These are my backup lights, work very well, expecially having a rear one so bright, so high up.

    I really don't know why they don't make a helmet mount for the Flash and Flare...it would seem sensible. I've seen a couple of people knocking round with a Flare jerry rigged to the back of a helmet, so it must be possible.
    Don't know if the joystick mount fits the flare, but i'll check later.
  • ol9
    ol9 Posts: 50
    I've Just had an hour fannying about siting the Flash & Flare on my Hard Nutz helmet and I think i've cracked it! :D

    just need to get some more suitable tie-wraps, pics to follow

    Be Safe Be Seen!
  • jonnyboy77 wrote:

    I've got one of these but the battery life is nowhere near whats advertised. Lucky if it lasts 10 hours.