shock/frame trouble.
matt fairclough
Posts: 49
I have recently had a lot of trouble with the shock end of my cannondale rz140(movement,rattling etc).
I replaced the bolts/bearings,greased and loctighted them,no improvement.
I have replaced the shock link which I thought would put an end to the problem,
athough there is no visible movement,there is still a knock when the shock compresses
and a bit of a rattling noise when I go over anything slightly rough.
Any ideas?Dont know what else I can do with it! :evil:
I replaced the bolts/bearings,greased and loctighted them,no improvement.
I have replaced the shock link which I thought would put an end to the problem,
athough there is no visible movement,there is still a knock when the shock compresses
and a bit of a rattling noise when I go over anything slightly rough.
Any ideas?Dont know what else I can do with it! :evil:
0
Comments
-
Shock bushing is the no. 1 suspect.0
-
No,replaced the bushings and the knock is still there,
anymore suggestions would be appreciated..0 -
just a thought but is possible to apply grease/lubricant into the shock(rockshox monarch)
beginning to think its the shock itself..0 -
if you gently lift the bike does it make a noise?0
-
nothing other than the usual creaks and groans,
why u ask?0
