Dogma 65.1 fitting Campagnolo EPS

beetle1
beetle1 Posts: 189
edited August 2013 in Workshop
Hello folks, just left my Dogma 65.1 at the bike shop to have the EPS ugrade fitted, they just rang to say the need the Dogma specific bracket to fit the battery underneath the bb area, has anyone come across this before?

Comments

  • ermintrude
    ermintrude Posts: 514
    Let me know if you still have a prob. With this. I have good Pinarello contacts and can find out for you.
  • beetle1
    beetle1 Posts: 189
    Ive been told by the supplier in Italy that it is a Pinarello extra, would be good if you can find out, he can get me one but Im in a rush for it, thanks a lot
  • Velonutter
    Velonutter Posts: 2,437
    Should be able to just buy the Campag under the BB brackets, that's all I did for my C59 and I bet you the mounts are the same.
  • mattbell
    mattbell Posts: 203
    beetle1 wrote:
    Hello folks, just left my Dogma 65.1 at the bike shop to have the EPS ugrade fitted, they just rang to say the need the Dogma specific bracket to fit the battery underneath the bb area, has anyone come across this before?

    I'm currently waiting a bracket for my madone. I though I had all the adaptors turned out there was another one! I've just used electrical tape to tape it to the down tube until it arrives.
  • beetle1
    beetle1 Posts: 189
    Hello folks, thanks for all the replies, I now have a definitive answer to the problem. 1) Pinarello / MOst do an aftermarket part which replaces the under bottom bracket cable guide with a similar part to mount the battery and allow the EPS cables to thread through, £46-£58 2) Campagnolo supply the EPS Non standard battery mount, £23-30. I know its the more expensive option but the Pinarello part is definitely the neater and purpose made solution. Hope this is of use to anyone else wanting to do the same.

Categories