Press Fit BB and Ultegra C/Set???

Moreyn
Moreyn Posts: 124
edited June 2013 in Workshop
I have a CUBE AGREE GTC PRO 2011 Model. The Bottom Bracket is a PRESS FIT. The hand-book doesn't tell you which model press-fit BB is installed, the chainset is a Shimano Compact 34/50 FC R600. I'd like to replace the C/Set with this Shimano Ultegra C/Set >> http://www.wiggle.co.uk/shimano-ultegra ... -chainset/
My question is : will it fit without any problems? a one off- -one on swap with no hassle? Help and advise appreciated.
M

Comments

  • denniskwok
    denniskwok Posts: 339
    Are you already running with an external Hollowtech 2 bottom bracket? If so, the Ultegra will be an easy direct swap. If you're not sure, post a picture up of the underside of the bb of your frame.
  • Monty Dog
    Monty Dog Posts: 20,614
    Direct swap, no need to change anything
    Make mine an Italian, with Campagnolo on the side..
  • munzy
    munzy Posts: 111
    If you're lucky and the right gearing/crank length/colour is for you a bit of a bargain here:

    http://www.merlincycles.com/bike-shop/r ... inset.html

    also comes with bottom bracket included :)
  • edten
    edten Posts: 228
    I think you may have a BB91 BB - do a search for BB91 Cube agree and loads of links come up. If so the Hollowtech will definitely fit.
  • TanukiRider
    TanukiRider Posts: 444
    My Addict has a BB91 and I just fitted a Hollowtech 2 Ultegra 6700 chainset, no problem :D
    Scott Addict R3
    Boardman CX 2014

Categories