rock shock monarch problem
chrisash86
Posts: 34
hello I have a rock shock monarch rear shock on my 2012 giant reign. the probem is I neeed to pump it up to nearly 300 psi to get the required sag is this normal I weigh 95 kg ?
0
Comments
-
What sag are you running?0
-
30% but the shock cant have anymore pressure, on my old bike fox float I only needed 1750
-
Not sure on the leverage ratio of this bike frame, but it sounds like it might be quite high. 30%-35% is on the ball for a bike like this, so as long as you are not above the max I would just ride.0
-
Could be the floodgate setting too high?0
-
whats the flood?gate setting0
-
What model of shock is it? Monarch R, RL, RCT?0
-
I have a monarch r on a anthem 2012
I run about 20% sag and need 250psi!
I weight 75kg!
Hope this helps0 -
thanks ellis what shock pump do u use mine is on the blink0
-
Sorry for delay.
I use the pump that came with the bike, sorry that's all I know
My rock shock monarch r says that 275psi is the max!!!
Check out the manuals on the website, there awesome!
Sounds like your pump may be the issue anyway, hope that's all it is!0
