FSA MegaExo Crank fitting help
doublem_1
Posts: 266
I need help fitting this crank. I bought one off of ebay and it seems to be missing some spacers. Looking at the fitting guide below:
http://cdn.ternbicycles.com/sites/defau ... nglish.pdf
I am missing two MW251 spacers. Does anyone know where I can buy these?
http://cdn.ternbicycles.com/sites/defau ... nglish.pdf
I am missing two MW251 spacers. Does anyone know where I can buy these?
0
Comments
-
It seems that the fitting guide I linked to is for a slightly different FSA crank. The crank I have is a the FSA Gamma drive.0
-
Actually, I don't think they need spacers on the outside of the BB. I havent tightened everything up and it seems fine!
Well apart from a little play in the crank but that could mean the BB needs tightening up. The BB is 73mm with one spacer on the drive side which how I think it should be installed.0 -
which FSA Gamma drive is it as there are lots of versions."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
FSA Gamma Drive Megaexo 22/32/44T.0