Replacing Rear Derailleur Cable - Shimano Sora

zoglug

Hey everybody,

im looking for some advice on how to replace the rear derailleur cable on my Specialized Allez. It has Sora shifters. I have removed the cable right back to the shifter, but i just cant seem to locate where it locks in. I hope this picture helps to explain a little


If someone can shed any light on how i remove the cable and fit the new cable id be very grateful.

Thanks

Zog

nicklouse

http://techdocs.shimano.com/media/techd ... 682074.PDF

might give a clue

or if that is not the version you have

http://techdocs.shimano.com/techdocs/bl ... ID=jNngskg

but it looks like you have not shifted to the small cog position. pull on the cable to apply some tension and work the small lever to get to the correct position.

zoglug

Thank you very much for the swift response. You were absolutely right and now it is all sorted! I just need to set the derailleur limits properly.

Again thanks

cheaterkiller

zoglug wrote:

Thank you very much for the swift response. You were absolutely right and now it is all sorted! I just need to set the derailleur limits properly.

Again thanks

you plonker!