RS Rev's - RLT or RCT3?
fat_homer
Posts: 470
Bit of advice.
Has anyone ridden both and is the RCT3 damper worth the extra over the RLT (probably 2012 model). I'd hopefully be setting them at 140mm if that makes any difference?
Cheers.
Has anyone ridden both and is the RCT3 damper worth the extra over the RLT (probably 2012 model). I'd hopefully be setting them at 140mm if that makes any difference?
Cheers.
0
Comments
-
RLT works like the old motion control damper - set the compression damper to where you want, built to lock you must move it all the way round, potentially losing your desired setting previously. You can then set the blow off force.
RCT3 allows you to lock the fork without moving the compression dial. You have 3 levels of 'lock'.
Th former is slightly more tunable, the latter more intuitive.0 -
I was under the impression, rightly or wrongly, that the damper in RCT3 was better, simalar to the old black box?0
-
It does have a seperate high speed damper (unadjustable), but both get the DNA damper tubes and dual flow rebound.0
-
-
Unless you are riding very hard and often bottom out, I would say not.0
-
Cheers Sonic, I'm a bit of a mincer so I'll probably go for the RLT's.0
