SRAM 2010 Technical Manual

BikingBob
BikingBob Posts: 77
edited January 2013 in MTB workshop & tech
I am just about to try some work on my X9 Rear Hub as its not engaging and I think the pawls are not releasing as they should.

I have found this technical Manual and thought I would share it here in case anybody else needs advice etc....

http://cdn.sram.com/cdn/farfuture/SBapqB1KCQ3-0NgWUaIzVaqNXbofxsy1YhKU5AjHm3k/mtime:1301686365/sites/default/files/techdocs/my10-sram-tech-manual-rev-a.pdf

I will let you all know how it goes... Fingers crossed !!!
Scott Scale 50 (Custom Spec)
Scott Genius LT 30

Comments

  • BikingBob
    BikingBob Posts: 77
    Ok, i have tried to get in at the hub mechanism and failed, this manual does not cover the follwing hub setup.

    Sram X9 V2 Disc IT with 12mm RWS 12 x 142mm

    Off to the bikeshop tomorrow to have lots of work done on my bike, I feel it will be expensive :(
    Scott Scale 50 (Custom Spec)
    Scott Genius LT 30
  • The Rookie
    The Rookie Posts: 27,812
    Why not just try a process of elimination, most hubs aren't that hard!
    Currently riding a Whyte T130C, X0 drivetrain, Magura Trail brakes converted to mixed wheel size (homebuilt wheels) with 140mm Fox 34 Rhythm and RP23 suspension. 12.2Kg.
  • cooldad
    cooldad Posts: 32,599
    DT Swiss hub I think.
    I don't do smileys.

    There is no secret ingredient - Kung Fu Panda

    London Calling on Facebook

    Parktools
  • chez_m356
    chez_m356 Posts: 1,893
    BikingBob wrote:
    Ok, i have tried to get in at the hub mechanism and failed, this manual does not cover the follwing hub setup.

    Sram X9 V2 Disc IT with 12mm RWS 12 x 142mm

    Off to the bikeshop tomorrow to have lots of work done on my bike, I feel it will be expensive :(
    don't know if any use, but page 54 on here http://cdn.sram.com/cdn/farfuture/x2NzQ ... ev_c_0.pdf diagram and break down of parts x9 rear hub
    Specialized Hardrock Sport Disc 10- CANYON Nerve AM 6 2011
  • BikingBob
    BikingBob Posts: 77
    I physically could not get a tool to open the hub, think it needs a specialist tool.. :(

    So bike shop have fixed (for free) as well as fixing my Twinloc & bent shifter lever, I pick up tomorrow..... :) as well as test ride either a Scale 29er or a Genius 27er :)
    Scott Scale 50 (Custom Spec)
    Scott Genius LT 30

Categories