Hub and rear wheel help?

jeffhob1985
jeffhob1985 Posts: 18
edited November 2012 in MTB workshop & tech
Hi all i have a specialized P2 2008 frame. and looking on ebay for a wheel set. Does anyone know if a nukeproof 135mm x 12mm hub will fit? or do i need a 150mm hub? and do i need a 12mm axle? or to have qr do i need a conversion??

Comments

  • warpcow
    warpcow Posts: 1,448
    I don't think any of what you've listed will fit. The P2 is a 135x10mm bolt-up with horizontal dropouts isn't it? You need a hub in that size, or that can be converted to that size. Or you could use a normal 135mm qr hub, but it's not ideal for a jump bike and you'd need a tugnut too.
    Commie Meta SL
    Evil Sovereign
    Santa Cruz Heckler (gone)
    On One Inbred (gone)
    Ragley Mmmbop (gone)
  • jeffhob1985
    jeffhob1985 Posts: 18
    Not sure on the frame size thats what i needed help with as can not look as frame is with a paint sprayer. I have won hubs on ebay and the rear is 135mm x 12mm!! Do you know if you can get a conversion kit to make it 10mm?
  • nicklouse
    nicklouse Posts: 50,675
    have a look for a 135 X12mm to 10mm axle. you may need to get the rear wheel re dished though depending on which P2 it is.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown

Categories