Simano Hollowtec b/b tool.
denis's mate
Posts: 88
Simple question, what tool(s) do I need to fit a Shimano Hollowtec crank and b/b (FC-M582).
Only ever fitted the UN type.
Only ever fitted the UN type.
0
Comments
-
0
-
supersonic wrote:
Ordered, thanks.0 -
And a facing tool before you try and fit it (actually get your LBS to do it, you don't want to pay for one of them!)Currently riding a Whyte T130C, X0 drivetrain, Magura Trail brakes converted to mixed wheel size (homebuilt wheels) with 140mm Fox 34 Rhythm and RP23 suspension. 12.2Kg.0
-
Facing at LBS is on the list.0
-
No probs, always worth checking!Currently riding a Whyte T130C, X0 drivetrain, Magura Trail brakes converted to mixed wheel size (homebuilt wheels) with 140mm Fox 34 Rhythm and RP23 suspension. 12.2Kg.0
-
why the facing tool?
I am looking to do the same as this already have the BB tool - fitting XTR BB0 -
What are you asking?Redhog14 wrote:why the facing tool?
I am looking to do the same as this already have the BB tool - fitting XTR BB
Yes your BB sheel will need facing if it has not been done."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
Because it's the only way to face it, and it would be a bit silly to trash and XTR BB by running it out of square for the sake of £20 getting it faced!Redhog14 wrote:why the facing tool?Currently riding a Whyte T130C, X0 drivetrain, Magura Trail brakes converted to mixed wheel size (homebuilt wheels) with 140mm Fox 34 Rhythm and RP23 suspension. 12.2Kg.0 -
The Beginner wrote:
Because it's the only way to face it, and it would be a bit silly to trash and XTR BB by running it out of square for the sake of £20 getting it faced!Redhog14 wrote:why the facing tool?
But for clarity, you wouldn't buy the tool, which costs hundreds, just get your LBS to do it.I don't do smileys.
There is no secret ingredient - Kung Fu Panda
London Calling on Facebook
Parktools0 -
Tool bought, shell faced (for £7:50), everything fitted and works fine.
All the tools available appear to be the spanner type. Is there one available that will fit a torque wrench for the bearings?0 -
Yes.0
-
Chunkers1980 wrote:Yes.
Yes, they are all the spanner type or yes I can get a socket for a torque wrench?0 -
denis's mate wrote:Chunkers1980 wrote:Yes.
Yes, they are all the spanner type or yes I can get a socket for a torque wrench?
Forget it, found a couple on Ebay.0
