Bottom bracket on my stumpy
jim453
Posts: 1,360
Ok, so next up is the bottom bracket.
It's got a bit of play in it and that's obviously not cool. So?
Is this a job I can do myself. I've done everything else thus far and am getting quite into it. Don't know what BB to get but it needs to have an isoflow crank on/through it so any ideas? As always, budget if poss.
Thanks guys.
It's got a bit of play in it and that's obviously not cool. So?
Is this a job I can do myself. I've done everything else thus far and am getting quite into it. Don't know what BB to get but it needs to have an isoflow crank on/through it so any ideas? As always, budget if poss.
Thanks guys.
0
Comments
-
You need to identify the type ie square taper (most likely). Then get the same one and size. It should be a standard 20 spline BB tool.0
-
Isoflow of what fitting? Square, ISIS, Powerspline or external?
Any can be DIY changed with the right tools....Currently riding a Whyte T130C, X0 drivetrain, Magura Trail brakes converted to mixed wheel size (homebuilt wheels) with 140mm Fox 34 Rhythm and RP23 suspension. 12.2Kg.0