which HOPE bracket do I need?

mrpiglet

Hi folks

trying to fit my HOPE M4's (183mm front rotor) to my FOX F series...

I've currently got an avid adaptor on but the pads aren't fully over the rotor, so I ordered what i though was the correct bracket from CRC but thats moved the caliper even further away!

what do i need?

thanks folks...

photos!






Mount A-Post Caliper to IS (F-160/R-140)
Mount B-Post Caliper to IS (F-203/R-183)
Mount C-Post Calipe to Post (F-203/R-203)
Mount D-Post Caliper to Boxxer, pre-2010 (F-203)
Mount E-Post Caliper to Fox 40 (F-203)
Mount F-Post Caliper to IS (F-180/R-160)
Mount G-Post Caliper IS (R-203)
Mount H-Post Caliper to Post (F-183)
Mount J-Post Caliper to IS (F-183)
Mount K-Post Caliper to Post (R -PM 140-PM 160)

nicklouse

which avid did you get? if a 185mm one then your caliper is only 1mm away from where it should be.

if a 180mm one then 2.5mm of spacers will put it in the right place.

but you need Mount H-Post Caliper to Post (F-183) if you are going to buy again.

mrpiglet

nicklouse wrote:

which avid did you get? if a 185mm one then your caliper is only 1mm away from where it should be.

if a 180mm one then 2.5mm of spacers will put it in the right place.

but you need Mount H-Post Caliper to Post (F-183) if you are going to buy again.

thanks for the reply

Thats the one i ordered but it seems to make it sit further away!?

mrpiglet

applogies, the rotor is 180mm!

the avid bracket is 185, so i'm 5mm out with that bracket?

nicklouse

mrpiglet wrote:

applogies, the rotor is 180mm!

the avid bracket is 185, so i'm 5mm out with that bracket?

no you are 2.5mm out.

so Hope dont do a POST POST 180 front but others do or longer bolts and 10mm tube spacers.

mrpiglet

thanks again, maybe i fitted it incorrectly earlier?!