Rockshox SID RL air set up!
hopper1
Posts: 4,389
Just had my new Scott Scale 20 (2012) delivered today.
Forks don't seem to be behaving right!
Never messed with forks before, so this is all pretty new to me...
Put 100psi in + & - air chambers. Wound the compression 8 clicks out from max. Got about 11mm of sag.
Pop loc function is having no effect on the forks... The forks move through about 35mm of suspension when I bounce on them, whether the pop loc is 'on', or 'off'.
Could it be that I need to adjust the cable, or is there something else I'm missing.
Typically, the SRAM site is awful!
EDIT: Sorted... Cable hadn't been pulled through properly!
Forks don't seem to be behaving right!
Never messed with forks before, so this is all pretty new to me...
Put 100psi in + & - air chambers. Wound the compression 8 clicks out from max. Got about 11mm of sag.
Pop loc function is having no effect on the forks... The forks move through about 35mm of suspension when I bounce on them, whether the pop loc is 'on', or 'off'.
Could it be that I need to adjust the cable, or is there something else I'm missing.
Typically, the SRAM site is awful!
EDIT: Sorted... Cable hadn't been pulled through properly!
Start with a budget, finish with a mortgage!
0
Comments
-
dual air? read the topic in the FAQs?"Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
Just to stop you getting too lazy - the sticky at the top of the Workshop and Tech forum
viewforum.php?f=10004
Tech FAQ'sI don't do smileys.
There is no secret ingredient - Kung Fu Panda
London Calling on Facebook
Parktools0 -
cooldad wrote:Just to stop you getting too lazy - the sticky at the top of the Workshop and Tech forum
viewforum.php?f=10004
Tech FAQ's
Ah, ok... I thought it was a reference to a FAQ page on the SRAM site... Little bit vague, really :?Start with a budget, finish with a mortgage!0