Hollowtech Pinch bolts
70\ʹspenguin
Posts: 957
Hi,
Ive stripped the head on one of my bolts and cant tighten it properly. Searching around it seems replacements for the bolts are a fekking rip-off at around £4 per bolt on flea bay.
I have the Deore HTII crankset and the tech doc states M6x19 bolts. I was wondering if these http://www.ebay.co.uk/itm/M4-M5-M6-M8-S ... 1774wt_806 would fit?
My main worry is the width of the head.
Any help appreciated, or alternatives please.
Thanks
Ive stripped the head on one of my bolts and cant tighten it properly. Searching around it seems replacements for the bolts are a fekking rip-off at around £4 per bolt on flea bay.
I have the Deore HTII crankset and the tech doc states M6x19 bolts. I was wondering if these http://www.ebay.co.uk/itm/M4-M5-M6-M8-S ... 1774wt_806 would fit?
My main worry is the width of the head.
Any help appreciated, or alternatives please.
Thanks
0
Comments
-
generally nope as the heads are smaller."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
Did the exact same thing a few weeks ago. Bought these - http://www.ebay.co.uk/itm/M6-x-20-black ... ceRpt=true
Perfect fit. Very strong. The allen key fits in the recess nice and deep so you can tighten them up nicely, 12.9 strength, no chance of rounding these off! .0