Rockshox dual air pressures

deveng
deveng Posts: 132
edited September 2012 in MTB workshop & tech
I've got a set of rockshox revelation 426 and the sticker on the lower legs that says what pressures to run is no longer there. I have done a bit of googling to no avail, does anyone have this info? I have found the relevant information for a 2010-present fork (mine are 2006-2009), will I go far wrong using this?
Wilier Izoard XP 105
Saracen Zen 1
SRAM/RaceFace 1x10

Comments

  • nicklouse
    nicklouse Posts: 50,675
    have a read of the topic in the FAQs.

    set your sag. then set the neg air to suit.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • plugp7
    plugp7 Posts: 298
    nicklouse wrote:
    have a read of the topic in the FAQs.

    set your sag. then set the neg air to suit.

    As Nick says.
    With my 426's to get anything like a reasonable level of sag I'm down to 100psi or less. Neg pressure same or +10 for bit more comfort on small bumps. Forget the pressures that were originally on the legs.
    Cotic Soul 26 inch. Whyte T130

Categories