Truing Jigs
Levi_501
Posts: 1,105
If anyone is interested or thinking of buying a truing jig;
I just bought a Minoura FT-1 Wheel Truing Base from Merlin, just under 80GBP with an addition 10% off at the checkout.
Bearing in mind that many truing stand cost a small fortune, I would recommend this one to anyone wanting maintain their own wheels.
http://www.merlincycles.com/bike-shop/w ... -base.html
I just bought a Minoura FT-1 Wheel Truing Base from Merlin, just under 80GBP with an addition 10% off at the checkout.
Bearing in mind that many truing stand cost a small fortune, I would recommend this one to anyone wanting maintain their own wheels.
http://www.merlincycles.com/bike-shop/w ... -base.html
0
Comments
-
Does it work for 20mm front and 150mm x 12mm rear axles?Transition Patrol - viewtopic.php?f=10017&t=130702350
-
RockmonkeySC wrote:Does it work for 20mm front and 150mm x 12mm rear axles?
Probobly not 20mm, but I see no reason why a 150 x 12 would not go in.0 -
Judging by the pic, a 20mm should be fine. Just bung a normal QR though it and tighten it up nice and tight. That should hold it firm enough, and the arm etc, will work whether centered on an axle or not.A Flock of Birds
+ some other bikes.0