Hope Pro 2 Evo 10mm rear

rob_g_clarkson

hello,

can anyone offer any advice on the following please?

I've got a Hope Pro 2 Evo rear hub and I want to convert it to 10mm instead of the standard 9mm QR... is there anyway I can do this as a QR option rather than the bolt in?

if this is a stupid question please forgive me :oops:

cheers

EDIT: this is the kit i've seen, but as you can see it's bolt in only... http://www.wiggle.co.uk/hope-pro-2-evo-mtb-rear-10mm-bolt-in-conversion-kit/?utm_source=google&utm_medium=base&utm_campaign=uk&utm_content=Hope-Hope_Pro_2_Evo_MTB_Rear_10mm_Bolt-In_Conversion_Kit-Silver

RevellRider

Yes you can, use the 10mm through axle converters on here:

http://www.wiggle.co.uk/hope-pro-2-evo- ... rsion-kit/

And one of these:

http://superstar.tibolts.co.uk/product_ ... cts_id=287

rob_g_clarkson

nice one.... cheers dude 8)

nicklouse

It is 10mm already.

What are you really wanting to do? Convert it to a through axel?

Or?

rob_g_clarkson

no it's a 9mm QR at the mo... and i'm wanting something beefier to stiffen up the rear end...

cooldad

Rear is 10mm. Front is 9mm.
As Nick pointed out.

nicklouse

rob_g_clarkson wrote:

no it's a 9mm QR at the mo... and i'm wanting something beefier to stiffen up the rear end...

No it is a 10mm qr. the rear qr standard axel is 10mm. The front is 9mm or 3/8".

Your rear drop outs are 10mm so you can fit any of the 10mm options from hope from nutter to a through axel.

If your bike had 9mm drop out you would be out of options.


So you can go for the hope through kit and then get a 10mm qr axel or a nutter through axel.

Or if hope still do it they used to do a bolted version of the qr hub that allow bolts instead of the Qr to be used.

RevellRider

The Op is wanting to convert to 10mm through axle, hence the reason he linked the bolt up kit in his original post.

All the information was there, and the answer has been provided

rob_g_clarkson

right... i think i've got my head around it, cheers for all the input.... sorry for my apparent idiocy!!!

nicklouse

No idiocy. But what you linked to is NOT for a through axel but a bolted axel. Nothing else is needed just that kit and some tools.

Also on a very slow connection.