At last - my BMC SLR01 is finally built!

brazilianhipster

After what feels like an age, she's finally built! The frame and wheelset came from the US, the saddle from a LBS in Melbourne and the rest came from CRC.

Here's the run-down:

Frame: 2011 BMC Team Machine SLR01 (size 60cm)
Forks: Team Machine SLR01 – carbon w/TCC
Bars: 3T ErgoNova Team Bars – 44cm
Stem: 3T ARX Team Stem – 130mm 6 Deg 1.1/8" 31.8mm
Headset: FSA
Bar Tape: Fizik

Front Brake Lever: Shimano Ultegra Shifters Double 10sp 6700
Front Caliper: Shimano Ultegra 6700
Rear Brake Lever: Shimano Ultegra Shifters Double 10sp 6700
Rear Caliper: Shimano Ultegra 6700

Shifters: Shimano Ultegra Shifters Double 10sp 6700
Cables: Gore Ride On Professional Cable Set
Front Mech: Shimano Ultegra Double 10sp 6700 – Braze On
Rear Mech: Shimano Ultegra 10sp 6700 – Short Cage

Seat: Fizik Arione CX carbon rails
Seat Post: BMC Integrated
Seat Post Clamp: BMC Integrated

Cranks: Shimano Ultegra Double Chainset 6700 – 175mm, 53 – 39
Chainring(s): Shimano Ultegra Double Chainset 6700 – 175mm, 53 – 39
Chain: Shimano Ultegra Chain 10 Speed 6701
Cassette: Shimano Ultegra Cassette 10 Speed 6700, 12 – 25
Pedals: Speedplay Zero Stainless – Black
Bottom Bracket: Enduro Zero Grade 3 Ceramic Bearings BB30

Front Wheel: 2011 Zipp 404
Tube: Continental Race 28 Light – 700 x 18 – 25 Presta 80mm
Tire: Continental GP4000 S Tyre – 700 x 23c Folding – Black/Black Skin

Back Wheel:
Tube: Continental Race 28 Light – 700 x 18-25 Presta 80mm
Tire: Continental GP4000 S Tyre – 700 x 23c Folding – Black/Black Skin

Accessories:

Enduro BB30 – 24mm Adaptor
SwissStop Flash Brake Pads (the green ones!)
Lizard Skins Clear Frame Patches
Topeak Shuttle CB Bottle Cages (2 No.)

Pictures:

http://flic.kr/s/aHsjzEb7bx

Not sure of the weight. Also, I'll shorten the stem to a 110mm length.

Thanks for taking a look at her!

Beatmaker

011 by brazilianhipster, on Flickr

Nice. I've always liked the way BMC's look.

Wheelspinner

Saw one of these yesterday at local cafe.. probably a size 55 I reckon it was, with Dura Ace Di2, 3T Ltd stem and bars, and Lightweight Standard wheels... Just lovely, was tempted to nick it, except there were about 100 potential witnesses sitting around..

One of these days I'll try one, would like an Impec too!

robbo2011

Very nice, I am thoroughly enjoying mine. I just wish I was good enough to do it justice.

Onsin

Just came across your post today. I built my BMC SLR01 last year before X'Mas. Like yours, I got all my frame and parts thru the net. Major differences with yours are: DA groupset (not Di2) with Rotor 3D+ crank and chainwheels 50/36, Sram BB30. I am using DA C24 wheelset. They are light and strong enough for me. Did you find the seat post very squeaky? I think the 2012 SLR01 has a seat post clamp instead to get rid of the squeaky noise. Did your fork come with the Colnago carbon steerer expander (60mm length)? I torqued that to 7N-m (Specialized recommends 9N-m for their expander and FSA 7N-m for theirs). I can't find the spec for Colnago expander. I have done about 1000k since and all is well except for the squeaky noise when sitting and climbing. But it climbs like a demon and very responsive. I am very happy with it overall. I don't know how to put a pic in here.