Scott AFD Elite
ovi
Posts: 396
Frame: Scott afd elite aluminium 58cm 2004
Forks: standard aluminium
Bars: standard aluminium
Stem: 130mm off my Kona muni-mula
Headset: standard
Bar Tape: standard
Front Brake Lever: tiagra
Front Caliper: scott pro
Rear Brake Lever: tiagra
Rear Caliper: scott pro
Shifters: tiagra
Front Mech: tiagra double
Rear Mech: tiagra 9 speed
Seat: work in progress but using a fizik aliante
Seat Post: aluminium
Cranks: tiagra
Chainring(s): tiagra
Chain: standard
Pedals: shimano R540
Front Wheel:
Rim: alex
Hub: scott
Tire: kenda (michelin pro 3 race on order)
Back Wheel:
Rim: alex
Hub: scott
Tire: kenda (michelin pro 3 race on order)
0
Comments
-
couldn't you have stood a bit further back? IIRC there's a thread somewhere on how to set up your bike for pictures, it's tongue in cheek but is sound advice given your picture!0
-
It was a bit of a ride out to do it again but here you go Arthur:
0 -
Good to see you've lined the crank arm up properly this time but I'm afraid the chain still isn't in the big ring.
MUST TRY HARDER!0 -
well... I'm not going back!!!0
-
ovi wrote:It was a bit of a ride out to do it again but here you go Arthur:
cheers ovi
here you go.
viewtopic.php?f=40044&t=12618247
with my nose pressed to the screen it looks a nice bike but you're right, that saddle has to go!0 -
great pics, very dramatic...0
-
Ahhhhh, the good old Transporter bridge!0
-
Mr752 wrote:Ahhhhh, the good old Transporter bridge!
I might nip home for a parmo at lunchtime......“Training is like fighting with a gorilla. You don’t stop when you’re tired. You stop when the gorilla is tired.”0 -
Is that transporter bridge blue paint scheme on the bike.0
-
jordan_217 wrote:Mr752 wrote:Ahhhhh, the good old Transporter bridge!
I might nip home for a parmo at lunchtime......
I had the news that the Middlesbrough delicacy of "Parmo" has now spread as far north as Durham city centre!
Nothing better than a chicken hotshot parmo with chips and salad!!!!!0 -
Cool, same bike as mine. Mine was the same colour as yours last year but since then I've had it powder coated and had custom colour graphics made for it, completely rebuilt it with new kit and it now looks as below...
0