xfusion rlx
garethwd
Posts: 52
Just fitted a new xfusion rlx as an upgrade too an xfusion oem shock with no rebound lock out ect...the bikes a rockrider 9.1...........
Problem is im not sure if there is a problem with my new shock or not, the original shock needed around 100psi to get 25% sag the new on is nearer 50 psi to 25%, problem is at 50 psi i using nearly all my travel just dropping of a curb, up the psi and i get no sag.
Does it need a few miles to loosen things up a little then have a play?
Problem is im not sure if there is a problem with my new shock or not, the original shock needed around 100psi to get 25% sag the new on is nearer 50 psi to 25%, problem is at 50 psi i using nearly all my travel just dropping of a curb, up the psi and i get no sag.
Does it need a few miles to loosen things up a little then have a play?
On One Codeine
On One Parkwood
My babies
On One Parkwood
My babies
0
Comments
-
also 50 psi seems extremely low from what i've read on set ups guides (x fusion dont have a psi chart that i can find for this shock)??On One Codeine
On One Parkwood
My babies0 -
Yep, sometimes shocks are a bit 'stiff' or 'slow' when new and take a few rides to bed in.0
