Rear mech

markyone
markyone Posts: 1,119
edited March 2012 in Workshop
Hi guys,
When riding up a hill and in the 25 sprocket the rear mech is just
pinging against the spokes.
I have to ride in the 23,i have mavic cosmic carbone campag hub 11 speed,
do i need a larger spacer or is it adjustment
Colnago c60 Eps super record 11
Pinarello F8 with sram etap

Comments

  • Smokin Joe
    Smokin Joe Posts: 2,706
    The low gear stop screw needs adjustment - sooner rather than later or you could end up with the mech in the spokes. There are two small screws on the mech marked "H" and "L". Adjust the "L" screw by turning it clockwise enough to keep the mech away from the spokes but still allowing you to use the large sprocket.
  • Monty Dog
    Monty Dog Posts: 20,614
    Also check your rear mech hanger alignment - the jockey wheel cage pinging on the spokes could be a sign it's taken a knock.
    Make mine an Italian, with Campagnolo on the side..

Categories