2005 Marzocchi 66rc
joey.h89
Posts: 4
Hi, hope everyone is well. I've been on this forum before but not for a few years.
I recently bought a pair of 2005 66rc's from eBay, they were advertised as 170mm but I'm sceptical now they've arrived.
So I'm asking a favour to anyone out there who has the same forks, could you please measure the stanchion length (i.e. bottom of crown to top of seal). Mine come out at 175mm which I think is quite small for a fork with 170mm travel.
Thanks a lot
Joe
I recently bought a pair of 2005 66rc's from eBay, they were advertised as 170mm but I'm sceptical now they've arrived.
So I'm asking a favour to anyone out there who has the same forks, could you please measure the stanchion length (i.e. bottom of crown to top of seal). Mine come out at 175mm which I think is quite small for a fork with 170mm travel.
Thanks a lot
Joe
0
Comments
-
Typically Marz stansion lengths are the travel plus a very little.
What length are yours?"Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
Oh right...mine measure 175mm0
-
Sounds like they are in 170 mode then.
If they were 150 it is just a strip and move a spacer in each leg."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
Thanks for you're help nicklous, measured my friends 150mm last night and they measure 155mm so as you said mine are in 170 mode.0