campag cabling

Cleat Eastwood
Cleat Eastwood Posts: 7,508
edited March 2012 in Workshop
Do you know when the cable casing (for the gears not the brakes) goes into the lever does the casing need one of those ferrule things on the end or can it go in naked like the brake cable casing.
The dissenter is every human being at those moments of his life when he resigns
momentarily from the herd and thinks for himself.

Comments

  • team47b
    team47b Posts: 6,425
    As log as the cable casing diameter is bigger than the hole it is not necessary to use a ferrule, I don't use them on mine.

    Just looked more closely at the clue in the thread title these are campy ones! I was talking Ultegra, could be different I guess. :oops:

    update:

    No ferrules are required going into the mark III body. Mark IIs do require them, but don’t try jamming a 5mm brake ferrule into the 4mm gear opening.
    my isetta is a 300cc bike
  • g00se
    g00se Posts: 2,221
    Yup, you don't need ferrules on the new shaped lever.

    If you're doing campag fettling, it's worth looking at the full technical docs online. It covers just about everything.http://www.campagnolo.com/jsp/en/doc/doccatid_8.jsp
  • Cleat Eastwood
    Cleat Eastwood Posts: 7,508
    cheers guys. nice one.
    The dissenter is every human being at those moments of his life when he resigns
    momentarily from the herd and thinks for himself.

Categories