SRAM spider / spindle part number query?

DodgeT
DodgeT Posts: 2,255
edited February 2012 in MTB workshop & tech
I may need to source a new spider / spindle and self extracting bolt, i'm unsure as to the terminology and cannot clearly identify it on the SRAM service manual.
Cranks are SRAM Carbon S-2200 10-speed double crankset with GXP spindle.
Going off page 49 http://www.sram.com/sites/default/files/techdocs/2012_sram_extdt_wheel_hub_spc_rev_c.pdf (and with lack of diagram, I can only see text, unlike the other pages) I'm assuming I need parts;

11.6115.551.000 Spider X0DH 104/64 bcd Single Speed GXP Mirror Black
11.6900.002.160 Crank Arm Bolt M15/M26 Alloy Self-Extracting GXP Black Qty 1

It's the two bits circled I need.. Am I right, a million miles off? Any help appreciated.. Also any ideas on best place who may have these in stock?
sramspider.jpg

Comments

  • nicklouse
    nicklouse Posts: 50,675
    not normal sevice parts. the axle is part of the right side crank arm so TBH buy new cranks.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • 1mancity2
    1mancity2 Posts: 2,355
    nicklouse wrote:
    not normal sevice parts. the axle is part of the right side crank arm so TBH buy new cranks.

    Told ya, saint all the way!
    Finished, Check out my custom Giant Reign 2010
    Dirt Jumper Dmr Sidekick2
  • DodgeT
    DodgeT Posts: 2,255
    Phew, what appeared to be a worn thread in the axle, it was actually the remains of the screw out of the l/h arm.
    So, cleaned out axle thread and fitted a new self extracting screw, good as new again.

    Oh and Nick, funnily enough, you were right, the axle is bonded to the arm.
    Thanks.

Categories