Easton haven rear hub conversion

Rolling Thunder
Rolling Thunder Posts: 42
edited February 2012 in MTB workshop & tech
Hi, hope someone can answer this, on the easton haven wheels, if the rear is currently a 9mm qr, can this be converted to a 10x 135 axel like as can be done on the front wheel 9mm qr to 20mm) ? cheers.

Comments

  • 386ka
    386ka Posts: 479
    Again, the rear is 10mm! The front is 9mm, 15 or 20.
    A much loved, Giant Trance X3 2010
  • nicklouse
    nicklouse Posts: 50,675
    Rolling Thunder wrote:
    Hi, hope someone can answer this, on the easton haven wheels, if the rear is currently a 9mm qr, can this be converted to a 10x 135 axel like as can be done on the front wheel 9mm qr to 20mm) ? cheers.
    It is.

    What are you wanting to do?
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • Rolling Thunder
    Rolling Thunder Posts: 42
    cheers, was wanting to be able to use the 10mm qr on my current bike but then use the wheel on future frames that are 10 x 35.
  • nicklouse
    nicklouse Posts: 50,675
    So you want to change it to a 10 mm through axel?
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • Rolling Thunder
    Rolling Thunder Posts: 42
    yes thats right, i assume that it can only be converted back to a 10 x 35 bolt thru and not a 12 x 35, im guessing that would require the other size wheel.

Categories