Charge Spoon saddle keeps coming loose
Bob Pertlewee
Posts: 24
Hello,
I recently changed my tundra saddle on my Giant Anthem X to a Charge Spoon. However, no matter how hard I tighten the bolt, it keeps coming loose and is very annoying. Any suggestions to stop this happening?
Cheers,
Bob
I recently changed my tundra saddle on my Giant Anthem X to a Charge Spoon. However, no matter how hard I tighten the bolt, it keeps coming loose and is very annoying. Any suggestions to stop this happening?
Cheers,
Bob
0
Comments
-
-
Saddles don't come loose, bolts do.I don't do smileys.
There is no secret ingredient - Kung Fu Panda
London Calling on Facebook
Parktools0 -
Is the seat-post gripping the rails of the seat correctly as any sudden jolt will free the seat off again.0
-
File a tiny bit of the seat rails in the clamping area off, just enough to get a rough surface to grip with, and do the same to the clamping area of the seatpost. Worked a treat for me when i was having a little bit of problems.0
-
Its a clamp, if it done up adequately then the surface finish is irrelevant, bad advice in my opinion, the issue as has been said is the bolt loosening.
SimonCurrently riding a Whyte T130C, X0 drivetrain, Magura Trail brakes converted to mixed wheel size (homebuilt wheels) with 140mm Fox 34 Rhythm and RP23 suspension. 12.2Kg.0 -
When you changed the saddle, did you have to repve the bolt(s) that hold the seatpost clamp together? If so are you 100% sure that you put them all back together in the correct order (washers, funny shaped nuts etc.)A Flock of Birds
+ some other bikes.0